Commercial Tenant Improvement (TI) Construction: How It Works in California

Commercial Tenant Improvement (TI) Construction: How It Works in California

By: Technick

Leased commercial space is modified through a tenantimprovement (TI) project to meet the needs of a specific occupant. InCalifornia, the project is governed by three documents and one agency. Theseinclude the lease, the work letter, the contractor's contract, and the localbuilding department. Missing a term in any of them means that you could loseyour allowance money, delay your opening, or expose your landlord's property toa lien. This guide describes who will pay, who will build, what California statelaw adds, and the process of how a TI project is completed.

What a Tenant Improvement Is

Any construction inside a leased space that adapts it to thetenant's use is considered a tenant improvement. These include new walls,ceilings, floors, light fixtures, plumbing, electric and mechanical systems,and special rooms.

TI is often confused with two related terms. A build-outusually involves constructing the entire interior of a bare shell. A TI projectcan be much smaller, such as converting one floor of a finished office.

A renovation often involves work performed by an owner on anentire building. A TI is kept within one tenant's premises and is governed bythe lease.

In practice, allthree terms are used loosely by brokers and contractors. The definitions of"Tenant Improvements" and "Landlord's Work" in your leaseshould be relied on because who pays is determined by those definitions.

Who Pays and WhoBuilds

Landlord's Work vs. Tenant's Work

The construction scope is divided by the work letter, anexhibit to your lease. Landlord's Work covers items the owner builds, such asbase-building systems or a delivered shell. Tenant's Work covers everythingelse. Read the exact boundary line, because unlisted items default to you.

Three Common FundingStructures

Turnkey means that the owner will build the requiredstructure and provide you with the finished product. You gain simplicity andlose design control and price visibility.

Allowance is the money to be paid per square footage thatthe landlord will provide. The contractor is hired, and the job is controlledby you. This arrangement gives you the most power and responsibility.

Under an as-is arrangement, the space is accepted in itscurrent condition. All changes are paid by you, often in exchange for lowerrent.

An allowance and free rent are different concessions. Rentpayments are reduced by free rent, while construction is funded by anallowance. One is often traded against the other by landlords, so they shouldbe compared as part of one total package.

How AllowanceReimbursement Works

The allowance is usually reimbursed by landlords after thework is completed, not before. A certificate of occupancy or final inspectionsign-off is typically required. The lien releases from your contractor andsubcontractor will also be necessary, and there will be no tenant default onthe lease.

There may be a deadline set in some leases, beyond which anyunused allowance will be lost. Calendar that date, because a delayed projectcan forfeit money.

Extra funds may also be offered by some landlords andrecovered through higher rent over the lease term. That choice lowers yourup-front cost and raises your total occupancy cost, so model it before youaccept.

California Rules That Shape TI Projects

Contractor Licensing

Contractors in California are licensed by the ContractorsState License Board (CSLB).Most commercial TI projects are handled by a generalbuilding contractor (Class B), who hires licensed specialty trades. Thelicense, bond, and workers' compensation coverage should be verified on theCSLB website before the contract is signed. It should also be checked that thelicense name matches the entity listed in the contract.

Building Codes andPermits

Plans are reviewed and the permit is issued by your localcity or county building department. The California Building Code, theCalifornia Energy Code, and CALGreen are all part of Title 24. Your architectmust design according to the edition in force when you submit your application.

Lighting-control and mechanical-efficiency requirementsunder the energy code are commonly triggered by TI projects. Fire sprinkler andfire alarm modifications may also be required.

Accessibility

Accessibility upgrades beyond your suite, such as restrooms,entrances, or the path of travel to your space, may be triggered byalterations. Under California law, it is also required that the lease statewhether the property has been inspected by a Certified Access Specialist(CASp). That inspection status should be requested early because responsibilityfor correcting violations is affected by it.

Change of Use

A different level of code review is triggered when yoursuite is changed from one occupancy type to another. Stricter fire, exiting,ventilation, and plumbing requirements are imposed by a shift from office to arestaurant, school, or medical use.

Changes to building systems outside your suite may also berequired. Confirm your use is legal under the building's zoning and certificateof occupancy before you commit to the lease.

Older Buildings andHazardous Materials

Asbestos, lead paint, or other regulated materials can bedisturbed during demolition in older buildings. Any existinghazardous-materials survey should be requested from the landlord. If noneexists, one should be commissioned before the walls are opened by yourcontractor.

Mechanics Liens andPayment Rules

Lien rights against the property are granted to contractors,subcontractors, and suppliers under California law when payment is notreceived. The landlord's building can be encumbered by a lien even if the moneyis owed by you.

State law prescribes the form and timing of preliminarynotices and lien releases. Collect conditional and unconditional releases witheach payment, and withhold final payment until you hold final releases. Yourlease likely requires you to clear any lien quickly, and failure can put you indefault.

The TI Process, Step by Step

Negotiate both the lease agreement and the work lettersimultaneously. Define the amount of the allowance, allowable expenses, andconditions for reimbursement, deadlines, and landlord’s approval rights. Hirean architect to prepare the test fit in order to show that the program will fitinto the space.

Get permission from the landlord for the design since almostall leases need the consent of the owner before applying for the permit. Choosethe contractor after making a comparison of at least two quotations line byline.

Submit the permit application in and be prompt withresponding to any comments in the plan check. A delayed response is more timeconsuming than the plan check process. Have the construction contract signedwith all terms laid out.

Work and check while coordinating inspections in advance,because if the inspection fails, dependent tasks cannot proceed. Close the jobwith a final inspection check-off or certificate of occupancy.

The final lien releases, warranties, and as-built drawingsshould be collected. Invoices and releases should be submitted to the landlordfor reimbursement before the allowance deadline.

Common Tradeoffs and Edge Cases

Landlord's contractor vs. your own. The landlord'scontractor or an approved list may be required to be used under some leases.The building is known to a landlord-controlled contractor, and coordination canbe simplified, but price competition is lost. The right to bid on the workshould be negotiated, even if final approval is retained by the landlord.

Landlord supervision fees. A fee for reviewing or overseeingtenant construction is charged by many landlords. The percentage or flat feeshould be requested in writing before the budget is finalized.

Lease-end restoration. Improvements may be required to beremoved, and the space may be required to be restored at the end of the termunder some leases. That obligation can be made expensive by a specialty build,such as a lab or a commercial kitchen. Negotiation should be undertakenregarding which items can be left in place.

TI isn't always the right path. If more structural,mechanical, or accessibility work is needed than is covered by the allowance,the total cost may be increased. A lower overall cost may be achieved byselecting a different building or a turnkey deal. The space should be walkedthrough by your contractor before the agreement is signed.

Frequently AskedQuestions

What is a tenantimprovement allowance?

A tenant improvement allowance is money contributed by alandlord toward your construction. It is usually stated as a dollar amount persquare foot. Reimbursement is commonly provided by landlords after the work iscompleted and the required documents, such as lien releases, are delivered.

Who pays for tenantimprovements in California?

The lease decides. Part of the work is often funded bylandlords through an allowance, while the remainder is paid by the tenant.Under a turnkey structure, the landlord builds a defined scope. Under an as-isstructure, the tenant pays everything.

How much doescommercial tenant improvement construction cost?

The cost is determined by the building type, the startingcondition of the space, your use, and the finish level. A test fit should berequested, and written bids should be obtained from at least two contractorsbased on the same plans. Those bids give you a real number, which publishedaverages, cannot.

Do I need a permitfor tenant improvements?

Usually yes. Permit review is triggered in most Californiajurisdictions when walls are moved, electrical or mechanical systems arechanged, or fire protection is altered. Permit review is sometimes not requiredfor cosmetic work, such as painting and floor coverings. Confirmation should beobtained from your local building department before work is started.

Is a tenantimprovement the same as a build-out?

Not exactly. Leased space is changed for a tenant's use byboth. However, a bare shell is often finished during a build-out, while anyalteration can be described as a tenant improvement. Your lease's definitionscontrol the money, not the label.

What happens if acontractor doesn't get paid on my TI project?

A mechanics lien can be filed against the property by unpaidcontractors, subcontractors, and suppliers. The landlord's building is affectedby this lien. Prevent this by collecting lien releases with each payment and bypaying your contractor on the contract's schedule.

Final Takeaway

A successful TI project starts with the lease, not theblueprint. Settle the work letter, the allowance conditions, and the landlord'sapproval rights first. A licensed contractor with comparable projects shouldthen be hired, and lien releases should be collected with every payment. Theallowance deadline should be added to the calendar so that every dollarpromised in the lease is collected.

 

 

‍

No items found.